Language:
Crossparts//Vennestraat 18//2275 Gierle//04 98 60 81 55

Producten

INJECTOR 550CC BOSCH/STUK

 65,00  53,72 ex. BTW

Artikelnummer: 0280158117 Categorie:

Beschrijving

Bosch 550cc Injector

High impedance injector

Package: 1x
Connector: Bosch USCAR  -> eventueel adapter mogelijk naar bosch europese stekker:

Adapter injector us car ->bosch

Length: 48,65mm – EV 14S (Standard) Use top adapter to get 60,65mm EV 14L (Long)
Injector tip: 11mm
O-ring top: 14mm Viton
O-ring bottom: 14mm Viton
Body diameter: 16mm
Impedance: 12 ohm
Spray pattern: 30 degrees 2 jets
Spray angle: 15 degree 270 degrees angle (spray angle against connector)
Fuel:
E85 / M100 compatible and can handle other standard fuels due to the
stainless internal parts. ATTENTION! If the injector is to be run on
methanol, it must be run through with regular fuel after use. These
injectors must not be in contact with methanol over more extended
periods.

Max flow measured static in test environment
29 PSI (2 bar) 420cc / min = 40 lb / h
43,5 PSI (3 bar) 510cc / min = 49 lb / h
58 PSI (4 bar) 588cc / min = 56 lb / h
78,5 PSI (5 bar) 657cc / min = 63 lb / h
88 PSI (6 bar) 732cc / min = 70 Ib / h
101,5PSI (7bar) 792cc / min = 75 lb / h

Please note that test environment versus practical use can vary
widely depending on peripheral equipment and other technical factors.
However, this is excellent information on what to expect from the
injectors and essential information when choosing other components in
the fuel system, such as fuel pump, fuel pressure regulator, and fuel
filter.